Máy chủ Supermicro A+ Server 4042G-72RF4
- Nhà sản xuất: SUPERMICRO
- Mã sản phẩm: A+ Server 4042G-72RF4
- Tình trạng: Còn hàng
- 0 VNĐ
- Giá chưa VAT: 0 VNĐ
Số lượng
Key Features
1. Four AMD Opteron™ 6000 series (6300P* ready) processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link support
2. Up to 1TB DDR3 1600MHz ECC Registered DIMM; 32x DIMM sockets
3. 2x PCI-E 2.0 x16 slots; 2x PCI-E 2.0 x8 slots
4. LSI 2208 8-port 6 Gbps SAS2 controller; HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB
cache) (50, 60 optional; additional parts required)
5. 5x Hot-swap SAS/SATA Drive Bays
6. 1400W High-efficiency Redundant Digital Power Supplies Platinum Certified
(94%)
7. Integrated IPMI 2.0 with Dedicated LAN
Specifications
Product SKUs |
|
| AS-4042G-72RF4 | A+ Server 4042G-72RF4 (Black) |
Motherboard |
|
| Super H8QG7-LNF4 | |
Processor/Chipset |
|
| CPU | Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support |
| Chipset | AMD SR5690/SR5670/SP5100 Chipset |
System Memory |
|
| Memory Capacity | 32 DIMM sockets Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix |
| Memory Type | Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | 1.35V or 1.5V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
|
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | LSI 2208 8-port SAS2 controller HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache) |
| IPMI | Support for Intelligent Platform
Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC |
| Network Controllers | Intel® I350 controller, 4-Port Gigabit
Ethernet 10/100/1000BASE-T support |
| VGA | Matrox G200 16MB DDR2 graphics |
| Super I/O | Winbond® W83527 chip |
Input / Output |
|
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | SAS2 x8 |
| LAN | 4 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI |
| USB | 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A |
| VGA | 1x VGA port |
| Serial Ports | 1x serial port header |
| IPMI | 1x dedicated IPMI LAN port; WPCM450 |
| Others | 1 SATA DOM power connector, TPM header |
Expansion Slots |
|
| PCI-Express | 2x PCI-E 2.0 x16 slots 2x PCI-E 2.0 x8 slots |
System BIOS |
|
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 |
Chassis |
|
| Form Factor | Tower / 4U Rackmountable |
| Model | CSE-748TQ-R1K43B |
Dimensions |
|
| Height | 7.0" (178mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Gross Weight | 87 lbs (39.5 kg) |
| Available Colors | Black |
Front Panel |
|
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED |
| Ports | 2x USB Ports |
Drive Bays |
|
| Hot-swap | 5x 3.5" Hot-swap SAS/SATA Drive Bays SAS or enterprise SATA HDD only recommended |
| Peripheral Bay(s) | 2x 5.25" Peripheral Drive Bay 1x 5.25" Bay For Floppy Drive |
SAS / SATA Backplane |
|
| SAS / SATA Hard Drive Backplane with SES2 | |
System Cooling |
|
| Fans | 3x 8200 RPM Hot-Swappable Cooling Fans 3x 8200 RPM Hot-Swappable Rear Exhaust Fan |
| Shrouds | 1x Air Shroud |
Power Supply |
|
| Redundant 1400W high-efficiency power supply with PMBus | |
| AC Voltage | 100-240 V, 50-60 Hz, 15 Amp max |
| +12V | 100 Amp/115 Vac 117 Amp/230 Vac |
| DC Output +12V |
100 Amp @ 100-140V 117 Amp @ 180-240V |
| With Power Distributor | +5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
| Certification | Platinum Certified |
PC Health Monitoring |
|
| CPU | Monitors CPU Core Voltages, +1.8V, +3.3V,
+5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator |
| FAN | Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis
environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic |
| LED | CPU / System Overheat LED +5V Standby Alert LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
Operating Environment / Compliance |
|
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F
to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Parts List - (Items Included) |
|||
| Part Number | Qty | Description | |
| Motherboard | MBD-H8QG7-LN4F | 1 | Super H8QG7-LN4F Motherboard |
| Chassis | CSE-748TQ-R1400B | 1 | 4U Chassis |
| Air Shroud | MCP-310-74802-0B | 1 | Mylar air shroud for H8QGi/6-F and H8QMi/3-2 |
| Cable 1 | CBL-0343L-01 | 1 | IPASS TO 4 SATA 76/66/54/45CM, W/ 66CM SB, S. 30AWG |
| Cable 2 | CBL-0188L-02 | 1 | IPASS TO 4 SATA 64/54/44/34CM, W/ 64CM SB, S. 30AWG |
| Heatsink / Retention | SNK-P0043P | 4 | 2U Passive CPU HS for AMD Socket G34 |
| IO Shield 1 | MCP-260-00060-0N | 1 | Standard I/O shield for H8QG7+ -LN4F with EMI Gasket |
| Power Supply | PWS-1K43F-1R | 2 | 1400W redundant digital power supply |
Optional Parts List |
|||
| Part Number | Qty | Description | |
| Adaptor HDD carrier | MCP-220-00080-0B | - | Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray |
| Cable(s) | CBL-0390L | - | 20-pin PWS to Two 6+2pin GPU PWS |